// Copyright (c) 2025 Alexey Mayshev and contributors. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package otter

import (
	"errors"

	"github.com/maypok86/otter/v2/stats"
)

const (
	defaultInitialCapacity = 16
)

var defaultExecutor = func(fn func()) {
	go fn()
}

// Options should be passed to [New]/[Must] to construct a [Cache] having a combination of the following features:
//
//   - automatic loading of entries into the cache
//   - size-based eviction when a maximum is exceeded based on frequency and recency
//   - time-based expiration of entries, measured since last access or last write
//   - asynchronously refresh when the first stale request for an entry occurs
//   - notification of deleted entries
//   - accumulation of cache access statistics
//
// These features are all optional; caches can be created using all or none of them. By default,
// cache instances created using [Options] will not perform any type of eviction.
//
//	cache := otter.Must(&Options[string, string]{
//		MaximumSize:      10_000,
//	  	ExpiryCalculator: otter.ExpiryWriting[string, string(10 * time.Minute),
//		StatsRecorder:    stats.NewCounter(),
//	})
//
// Entries are automatically evicted from the cache when any of MaximumSize, MaximumWeight,
// ExpiryCalculator are specified.
//
// If MaximumSize or MaximumWeight is specified, entries may be evicted on each cache modification.
//
// If ExpiryCalculator is specified, then entries may be evicted on
// each cache modification, on occasional cache accesses, or on calls to [Cache.CleanUp].
// Expired entries may be counted by [Cache.EstimatedSize], but will never be visible to read or write operations.
//
// Certain cache configurations will result in the accrual of periodic maintenance tasks that
// will be performed during write operations, or during occasional read operations in the absence of writes.
// The [Cache.CleanUp] method of the returned cache will also perform maintenance, but
// calling it should not be necessary with a high-throughput cache. Only caches built with
// MaximumSize, MaximumWeight, ExpiryCalculator perform periodic maintenance.
type Options[K comparable, V any] struct {
	// MaximumSize specifies the maximum number of entries the cache may contain.
	//
	// This option cannot be used in conjunction with MaximumWeight.
	//
	// NOTE: the cache may evict an entry before this limit is exceeded or temporarily exceed the threshold while evicting.
	// As the cache size grows close to the maximum, the cache evicts entries that are less likely to be used again.
	// For example, the cache may evict an entry because it hasn't been used recently or very often.
	MaximumSize int
	// MaximumWeight specifies the maximum weight of entries the cache may contain. Weight is determined using the
	// callback specified with Weigher.
	// Use of this method requires specifying an option Weigher prior to calling New.
	//
	// This option cannot be used in conjunction with MaximumSize.
	//
	// NOTE: the cache may evict an entry before this limit is exceeded or temporarily exceed the threshold while evicting.
	// As the cache size grows close to the maximum, the cache evicts entries that are less likely to be used again.
	// For example, the cache may evict an entry because it hasn't been used recently or very often.
	//
	// NOTE: weight is only used to determine whether the cache is over capacity; it has no effect
	// on selecting which entry should be evicted next.
	MaximumWeight uint64
	// StatsRecorder accumulates statistics during the operation of a Cache.
	//
	// NOTE: If your stats.Recorder implementation doesn't also implement stats.Snapshoter,
	// Cache.Stats method will always return a zero-value snapshot.
	StatsRecorder stats.Recorder
	// InitialCapacity specifies the minimum total size for the internal data structures. Providing a large enough estimate
	// at construction time avoids the need for expensive resizing operations later, but setting this
	// value unnecessarily high wastes memory.
	InitialCapacity int
	// Weigher specifies the weigher to use in determining the weight of entries. Entry weight is taken into
	// consideration by MaximumWeight when determining which entries to evict, and use
	// of this method requires specifying an option MaximumWeight prior to calling New.
	// Weights are measured and recorded when entries are inserted into or updated in
	// the cache, and are thus effectively static during the lifetime of a cache entry.
	//
	// When the weight of an entry is zero it will not be considered for size-based eviction (though
	// it still may be evicted by other means).
	Weigher func(key K, value V) uint32
	// ExpiryCalculator specifies that each entry should be automatically removed from the cache once a duration has
	// elapsed after the entry's creation, the most recent replacement of its value, or its last read.
	// The expiration time is reset by all cache read and write operations.
	ExpiryCalculator ExpiryCalculator[K, V]
	// OnDeletion specifies a handler instance that caches should notify each time an entry is deleted for any
	// DeletionCause reason. The cache will invoke this handler on the configured Executor
	// after the entry's deletion operation has completed.
	//
	// An OnAtomicDeletion may be preferred when the handler should be invoked
	// as part of the atomic operation to delete the entry.
	OnDeletion func(e DeletionEvent[K, V])
	// OnAtomicDeletion specifies a handler that caches should notify each time an entry is deleted for any
	// DeletionCause. The cache will invoke this handler during the atomic operation to delete the entry.
	//
	// A OnDeletion may be preferred when the handler should be performed outside the atomic operation to
	// delete the entry, or be delegated to the configured Executor.
	OnAtomicDeletion func(e DeletionEvent[K, V])
	// RefreshCalculator specifies that active entries are eligible for automatic refresh once a duration has
	// elapsed after the entry's creation, the most recent replacement of its value, or the most recent entry's reload.
	// The semantics of refreshes are specified in Cache.Refresh,
	// and are performed by calling Loader.Reload in a separate background goroutine.
	//
	// Automatic refreshes are performed when the first stale request for an entry occurs. The request
	// triggering the refresh will make an asynchronous call to Loader.Reload to get a new value.
	// Until refresh is completed, requests will continue to return the old value.
	//
	// NOTE: all errors returned during refresh will be logged (using Logger) and then swallowed.
	RefreshCalculator RefreshCalculator[K, V]
	// Executor specifies the executor to use when running asynchronous tasks. The executor is delegated to
	// when sending deletion events, when asynchronous computations are performed by
	// Cache.Refresh/Cache.BulkRefresh or for refreshes in Cache.Get/Cache.BulkGet, if RefreshCalculator was specified,
	// or when performing periodic maintenance. By default, goroutines are used.
	//
	// The primary intent of this method is to facilitate testing of caches which have been configured
	// with OnDeletion or utilize asynchronous computations. A test may instead prefer
	// to configure the cache to execute tasks directly on the same goroutine.
	//
	// Beware that configuring a cache with an executor that discards tasks or never runs them may
	// experience non-deterministic behavior.
	Executor func(fn func())
	// Clock specifies a nanosecond-precision time source for use in determining when entries should be
	// expired or refreshed. By default, time.Now().UnixNano() is used.
	//
	// The primary intent of this option is to facilitate testing of caches which have been configured
	// with ExpiryCalculator or RefreshCalculator.
	//
	// NOTE: this clock is not used when recording statistics.
	Clock Clock
	// Logger specifies the Logger implementation that will be used for logging warning and errors.
	//
	// The cache will use slog.Default() by default.
	Logger Logger
}

func (o *Options[K, V]) getMaximum() uint64 {
	if o.MaximumSize > 0 {
		return uint64(o.MaximumSize)
	}
	if o.MaximumWeight > 0 {
		return o.MaximumWeight
	}
	return 0
}

func (o *Options[K, V]) hasInitialCapacity() bool {
	return o.InitialCapacity > 0
}

func (o *Options[K, V]) getInitialCapacity() int {
	if o.hasInitialCapacity() {
		return o.InitialCapacity
	}
	return defaultInitialCapacity
}

func (o *Options[K, V]) getExecutor() func(fn func()) {
	if o.Executor == nil {
		return defaultExecutor
	}
	return o.Executor
}

func (o *Options[K, V]) getWeigher() func(key K, value V) uint32 {
	if o.Weigher == nil {
		return func(key K, value V) uint32 {
			return 1
		}
	}
	return o.Weigher
}

func (o *Options[K, V]) getLogger() Logger {
	if o.Logger == nil {
		return newDefaultLogger()
	}
	return o.Logger
}

func (o *Options[K, V]) validate() error {
	if o.MaximumSize > 0 && o.MaximumWeight > 0 {
		return errors.New("otter: both maximumSize and maximumWeight are set")
	}
	if o.MaximumSize > 0 && o.Weigher != nil {
		return errors.New("otter: both maximumSize and weigher are set")
	}

	if o.MaximumWeight > 0 && o.Weigher == nil {
		return errors.New("otter: maximumWeight requires weigher")
	}
	if o.Weigher != nil && o.MaximumWeight <= 0 {
		return errors.New("otter: weigher requires maximumWeight")
	}

	if o.MaximumSize < 0 {
		return errors.New("otter: maximumSize should be positive")
	}
	if o.InitialCapacity < 0 {
		return errors.New("otter: initial capacity should be positive")
	}

	return nil
}