// Package pop3 provides a zgrab2 module that scans for POP3 mail
// servers.
// Default Port: 110 (TCP)
//
// The --send-help and --send-noop flags tell the scanner to send a
// HELP or NOOP command and read the response.
//
// The --pop3s flag tells the scanner to perform a TLS handshake
// immediately after connecting, before even attempting to read
// the banner.
// The --starttls flag tells the scanner to send the STLS command,
// and then negotiate a TLS connection.
// The scanner uses the standard TLS flags for the handshake.
// --pop3s and --starttls are mutually exclusive.
// --pop3s does not change the default port number from 110, so
// it should usually be coupled with e.g. --port 995.
//
// The --send-quit flag tells the scanner to send a QUIT command
// before disconnecting.
//
// So, if no flags are specified, the scanner simply reads the banner
// returned by the server and disconnects.
//
// The output contains the banner and the responses to any commands that
// were sent, and if or --pop3s --starttls were set, the standard TLS logs.
package pop3

import (
	"fmt"
	"strings"

	log "github.com/sirupsen/logrus"
	"github.com/zmap/zgrab2"
)

// ScanResults instances are returned by the module's Scan function.
type ScanResults struct {
	// Banner is the string sent by the server immediately after connecting.
	Banner string `json:"banner,omitempty"`

	// NOOP is the server's response to the NOOP command, if one is sent.
	NOOP string `json:"noop,omitempty"`

	// HELP is the server's response to the HELP command, if it is sent.
	HELP string `json:"help,omitempty"`

	// StartTLS is the server's response to the STARTTLS command, if it is sent.
	StartTLS string `json:"starttls,omitempty"`

	// QUIT is the server's response to the QUIT command, if it is sent.
	QUIT string `json:"quit,omitempty"`

	// TLSLog is the standard TLS log, if --starttls or --pop3s is enabled.
	TLSLog *zgrab2.TLSLog `json:"tls,omitempty"`
}

// Flags holds the command-line configuration for the POP3 scan module.
// Populated by the framework.
type Flags struct {
	zgrab2.BaseFlags
	zgrab2.TLSFlags

	// SendHELP indicates that the client should send the HELP command.
	SendHELP bool `long:"send-help" description:"Send the HELP command"`

	// SendNOOP indicates that the NOOP command should be sent.
	SendNOOP bool `long:"send-noop" description:"Send the NOOP command before closing."`

	// SendQUIT indicates that the QUIT command should be sent.
	SendQUIT bool `long:"send-quit" description:"Send the QUIT command before closing."`

	// POP3Secure indicates that the client should do a TLS handshake immediately after connecting.
	POP3Secure bool `long:"pop3s" description:"Immediately negotiate a TLS connection"`

	// StartTLS indicates that the client should attempt to update the connection to TLS.
	StartTLS bool `long:"starttls" description:"Send STLS before negotiating"`

	// Verbose indicates that there should be more verbose logging.
	Verbose bool `long:"verbose" description:"More verbose logging, include debug fields in the scan results"`
}

// Module implements the zgrab2.Module interface.
type Module struct {
}

// Scanner implements the zgrab2.Scanner interface.
type Scanner struct {
	config *Flags
}

// RegisterModule registers the zgrab2 module.
func RegisterModule() {
	var module Module
	_, err := zgrab2.AddCommand("pop3", "pop3", module.Description(), 110, &module)
	if err != nil {
		log.Fatal(err)
	}
}

// NewFlags returns a default Flags object.
func (module *Module) NewFlags() interface{} {
	return new(Flags)
}

// NewScanner returns a new Scanner instance.
func (module *Module) NewScanner() zgrab2.Scanner {
	return new(Scanner)
}

// Description returns an overview of this module.
func (module *Module) Description() string {
	return "Fetch POP3 banners, optionally over TLS"
}

// Validate checks that the flags are valid.
// On success, returns nil.
// On failure, returns an error instance describing the error.
func (flags *Flags) Validate(args []string) error {
	if flags.StartTLS && flags.POP3Secure {
		log.Error("Cannot send both --starttls and --pop3s")
		return zgrab2.ErrInvalidArguments
	}
	return nil
}

// Help returns the module's help string.
func (flags *Flags) Help() string {
	return ""
}

// Init initializes the Scanner.
func (scanner *Scanner) Init(flags zgrab2.ScanFlags) error {
	f, _ := flags.(*Flags)
	scanner.config = f
	return nil
}

// InitPerSender initializes the scanner for a given sender.
func (scanner *Scanner) InitPerSender(senderID int) error {
	return nil
}

// GetName returns the Scanner name defined in the Flags.
func (scanner *Scanner) GetName() string {
	return scanner.config.Name
}

// GetTrigger returns the Trigger defined in the Flags.
func (scanner *Scanner) GetTrigger() string {
	return scanner.config.Trigger
}

// Protocol returns the protocol identifier of the scan.
func (scanner *Scanner) Protocol() string {
	return "pop3"
}

func getPOP3Error(response string) error {
	if !strings.HasPrefix(response, "-") {
		return nil
	}
	return fmt.Errorf("POP3 error: %s", response[1:])
}

// Check the contents of the POP3 header and return a relevant ScanStatus
func VerifyPOP3Contents(banner string) zgrab2.ScanStatus {
	lowerBanner := strings.ToLower(banner)
	switch {
	case strings.HasPrefix(banner, "-ERR "):
		return zgrab2.SCAN_APPLICATION_ERROR
	case strings.HasPrefix(banner, "+OK "),
		banner == "+OK\r\n",
		strings.Contains(banner, "POP3"),
		// These are rare for POP3 if they happen at all,
		// But it won't hurt to check just in case as a backup
		strings.Contains(lowerBanner, "blacklist"),
		strings.Contains(lowerBanner, "abuse"),
		strings.Contains(lowerBanner, "rbl"),
		strings.Contains(lowerBanner, "spamhaus"),
		strings.Contains(lowerBanner, "relay"):
		return zgrab2.SCAN_SUCCESS
	default:
		return zgrab2.SCAN_PROTOCOL_ERROR
	}
}

// Scan performs the POP3 scan.
//  1. Open a TCP connection to the target port (default 110).
//  2. If --pop3s is set, perform a TLS handshake using the command-line
//     flags.
//  3. Read the banner.
//  4. If --send-help is sent, send HELP, read the result.
//  5. If --send-noop is sent, send NOOP, read the result.
//  6. If --starttls is sent, send STLS, read the result, negotiate a
//     TLS connection using the command-line flags.
//  7. If --send-quit is sent, send QUIT and read the result.
//  8. Close the connection.
func (scanner *Scanner) Scan(target zgrab2.ScanTarget) (zgrab2.ScanStatus, interface{}, error) {
	c, err := target.Open(&scanner.config.BaseFlags)
	if err != nil {
		return zgrab2.TryGetScanStatus(err), nil, err
	}
	defer c.Close()
	result := &ScanResults{}
	if scanner.config.POP3Secure {
		tlsConn, err := scanner.config.TLSFlags.GetTLSConnection(c)
		if err != nil {
			return zgrab2.TryGetScanStatus(err), nil, err
		}
		result.TLSLog = tlsConn.GetLog()
		if err := tlsConn.Handshake(); err != nil {
			return zgrab2.TryGetScanStatus(err), result, err
		}
		c = tlsConn
	}
	conn := Connection{Conn: c}
	banner, err := conn.ReadResponse()
	if err != nil {
		return zgrab2.TryGetScanStatus(err), nil, err
	}
	// Quit early if no valid response
	// OR save it to return later
	sr := VerifyPOP3Contents(banner)
	if sr == zgrab2.SCAN_PROTOCOL_ERROR {
		return sr, nil, fmt.Errorf("Invalid POP3 banner: %s", banner)
	}
	result.Banner = banner
	if scanner.config.SendHELP {
		ret, err := conn.SendCommand("HELP")
		if err != nil {
			return zgrab2.TryGetScanStatus(err), result, err
		}
		result.HELP = ret
	}
	if scanner.config.SendNOOP {
		ret, err := conn.SendCommand("NOOP")
		if err != nil {
			return zgrab2.TryGetScanStatus(err), result, err
		}
		result.NOOP = ret
	}
	if scanner.config.StartTLS {
		ret, err := conn.SendCommand("STLS")
		if err != nil {
			return zgrab2.TryGetScanStatus(err), result, err
		}
		result.StartTLS = ret
		if err := getPOP3Error(ret); err != nil {
			return zgrab2.TryGetScanStatus(err), result, err
		}
		tlsConn, err := scanner.config.TLSFlags.GetTLSConnection(conn.Conn)
		if err != nil {
			return zgrab2.TryGetScanStatus(err), result, err
		}
		result.TLSLog = tlsConn.GetLog()
		if err := tlsConn.Handshake(); err != nil {
			return zgrab2.TryGetScanStatus(err), result, err
		}
		conn.Conn = tlsConn
	}
	if scanner.config.SendQUIT {
		ret, err := conn.SendCommand("QUIT")
		if err != nil {
			if err != nil {
				return zgrab2.TryGetScanStatus(err), nil, err
			}
		}
		result.QUIT = ret
	}
	return sr, result, nil
}